Skip to content

XFCE desktop environment

The XFCE desktop environment, created as a fork of the Common Desktop Environment (CDE), embodies the traditional Unix philosophy of modularity and re-usability. You can install XFCE on almost any version of Linux, including Rocky Linux.

It is also one of the most accessible desktop environments to combine with alternate window managers, such as Awesome or i3. This procedure, however, will get you up and running with Rocky Linux and a more typical XFCE installation.

Prerequisites

  • A workstation or notebook
  • A desire to run XFCE as your desktop instead of the default GNOME desktop
  • For the 9 minimal and 8 procedures, the ability to sudo to elevate privileges

9: Introduction

The development team for Rocky Linux 9 has made installing XFCE, and other popular desktop environments, uncomplicated by including live images. For those that might not know what that is, a live image is a bootable image that will load the OS without installation. When loaded, you have the option to install it to your machine's disk drive and use it.

9: Get, verify, and write the XFCE live image

Prior to installation, the first step is to download the live image and write that to a DVD or a USB thumb drive. As stated earlier, the image will be bootable, just like any other installation media for Linux. You can find the latest XFCE image in the download section for Rocky Linux 9 live images. Note that this particular link assumes x86_64 is your processor's architecture.

As of this writing, you can use x86_64 or aarch64 architectures for this live image. Download the live image and checksum files.

Verify the image with the CHECKSUM file with the following

(note this is an example! Ensure your image name and CHECKSUM files match): 

sha256sum -c CHECKSUM --ignore-missing Rocky-9-XFCE-x86_64-latest.iso.CHECKSUM

If all goes well, you will see this message:

Rocky-9-XFCE-x86_64-latest.iso: OK

If the checksum for the file returns OK, you are now ready to write your ISO image to your media. This procedure differs depending on the OS, the media, and the tools. We are assuming here that you know how to write the image to your media.

9: Booting

This again is different by machine, BIOS, OS, and so on. You will need to ensure that your machine is set to boot to whatever your media is (DVD or USB) as the first boot device. This screen will show if you are successful:

xfce_boot

If so, you are on your way! If you want to test the media, you can enter that option first, or you can enter S to Start Rocky Linux XFCE 9.0.

Remember, this is a live image. It is going to take some time to boot to the first screen. Do not panic, just wait! When the live image boots, you will see this screen:

xfce_install

9: Installing XFCE

At this point, you can use the XFCE environment. When you decide to use it permanently, double-click the option to Install to Hard Drive.

This will start a pretty familiar installation process for those who have installed Rocky Linux before. The first screen will allow the selection your default language:

xfce_language

The next screen will have some things that you need to verify or change. The options are numbered for reference:

xfce_install2

  1. Keyboard - Ensure that it matches up to the keyboard layout that you use.
  2. Time & Date - Ensure this matches up to your time zone.
  3. Installation Destination - You will need to click into this option, even if it is just to accept what is already there.
  4. Network & Host Name - Verify that you have what you want here. Provided the network is enabled, you can always change this later if you need to.
  5. Root Password - Set a root password. Remember to save this somewhere safe (password manager).
  6. User Creation - Create at least one user. If you want the user to have administrative rights, set this option when creating the user.
  7. Begin Installation - When completed and verified, click this option.

When you do step 7, the installation process will start installing packages, shown in this screenshot:

xfce_install3

After the installation to the hard drive is complete, you will see the following screen:

xfce_install_final

Click Finish Installation.

When you have done this, it will take you back to the live image screen. Reboot your machine and remove the boot media you used for the XFCE install.

Next you will get a login screen with the user you created above. Enter your password, which will get you to the XFCE desktop:

xfce_desktop

9 minimal: Introduction

If you installed Rocky Linux 9.x and decide that you want to install XFCE after, this procedure will get you there. This procedure assumes installation of Rocky-9.4-x86_64-minimal.iso.

Update your system

First, ensure the update of your system:

sudo dnf update -y && dnf upgrade -y

9_min1

Secondly, run the command below to install epel-release repo which contains all packages that we need to install for Xfce Desktop.

sudo dnf install epel-release -y

9_min2

Install XFCE desktop

Install XFCE by running this command:

sudo dnf groupinstall xfce -y

9_min3

Starting the XFCE desktop

You can launch the XFCE desktop from the command line if you see the message "Complete!" in the command output and no errors. 

sudo systemctl isolate graphical.target

Enable XFCE desktop on boot

At this point you have installed the XFCE desktop on the system and ensured it functions by running it from the command line. If you always want your system to start with XFCE instead of the command line, you need to run the following command. You will need to open the XFCE terminal from the 9 points icon first:

sudo systemctl set-default graphical.target

9_min5

NOTE: You can log in with your root username and password.

9_min6

Now you can test it. Reboot your system with the sudo reboot command. You will see your system opening with the XFCE desktop login screen.

9_min7

8: Install Rocky Linux minimal

Note

Throughout this section, you will either need to be the root user or be able to sudo to elevate your privileges.

When installing Rocky Linux, we used the following sets of packages:

  • Minimal
  • Standard

8: Run System Update

First, run the server update command. The system will rebuild the repository cache. In this way, the system cab recognize the packages available.

dnf update

8: Enabling repositories

You need the unofficial repository for XFCE in the EPEL repository, to run on Rocky 8.x versions.

Enable this repository by entering:

dnf install epel-release

Answer 'Y' to install it.

You also need the Powertools and lightdm repositories. Enable those now:

dnf config-manager --set-enabled powertools
dnf copr enable stenstorp/lightdm

Warning

The copr build system creates a repository that is known to work for installing lightdm, but is not maintained by the Rocky Linux community. Use at your own risk!

Again, you will be presented with a warning message about the repository. Go ahead and answer Y to the prompt.

8: Check the available environments and tools in the group

Now that the repositories are enabled, run the following commands to check everything.

First, check your repository listing with:

dnf repolist

You should get the following back showing all of the enabled repositories:

appstream                                                        Rocky Linux 8 - AppStream
baseos                                                           Rocky Linux 8 - BaseOS
copr:copr.fedorainfracloud.org:stenstorp:lightdm                 Copr repo for lightdm owned by stenstorp
epel                                                             Extra Packages for Enterprise Linux 8 - x86_64
epel-modular                                                     Extra Packages for Enterprise Linux Modular 8 - x86_64
extras                                                           Rocky Linux 8 - Extras
powertools                                                       Rocky Linux 8 - PowerTools

Run the following command to check for XFCE:

dnf grouplist

You should see "Xfce" at the bottom of the listing.

Run dnf update one more time to ensure all of the enabled repositories read into the system.

8: Installing packages

To install XFCE, run:

dnf groupinstall "xfce"

Also install lightdm:

dnf install lightdm

8: Final steps

You need to disable gdm, which gets added and enabled during dnf groupinstall "xfce":

systemctl disable gdm

Now you can enable lightdm:

systemctl enable lightdm

You need to tell the system after booting to use only the graphical user interface. Set the default target system to the GUI interface:

systemctl set-default graphical.target

Then reboot:

reboot

You should end up with a login prompt in the XFCE GUI, and when you login, you will have all of the XFCE environment.

Conclusion

XFCE is a light environment with a simplistic interface. It is an alternative to the default GNOME desktop on Rocky Linux. If you are running Rocky Linux 9, the developers have created a handy live image that speeds up the installation process.

Author: Gerard Arthus, Steven Spencer, Emre Camalan

Contributors: Steven Spencer, Antoine Le Morvan, K.Prasad, Ganna Zhyrnova